Description
Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a back door such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: Direct contact between components and power or lightning circuits, static charge buildup on cables and component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) and potential differences (even from building to building, between safety grounds to which components are connected.)
Technical Information
Plug/Connector Type: Not Applicable
Receptacles: Not Applicable
Dataline Protection: RJ-45 DSL/Fax/Modem
Power Description
Current: 200A Surge Current
Filtering: EMI/RFI Noise rejection (100 kHz to 10 mHz) 0 dB
Environmental Conditions
Temperature: 5 °F (-15 °C) to 113 °F (45 °C) Operating5 °F (-15 °C) to 113 °F (45 °C) Storage
Humidity: 0% to 95% Relative Humidity Operating0% to 95% Non-condensing Relative Humidity Storage
Physical Characteristics
Power Cord/Cable: Not Applicable
Color: Beige
Dimensions: 4.05" Height x 1.87" Width x 1.1" Depth
Shipping Dimensions: 4.1" Height x 3.55" Width x 1.15" Depth
Weight: 0.14 lb
Shipping Weight: 0.3 lb
Miscellaneous
Package Contents: - ProtectNet PTEL2
- User Manual
Additional Information:
- Catastrophic Event Protection
System Requirements:
- Use only for analog modems, fax machines and other telecommunication devices
- The PTEL2 must be connected to earth ground
Certifications & Standards:
Warranty
Standard Warranty: 10 Year Repair/Replace
Customer Reviews
