Description
The Master View ACS-1216A KVM Switch controls units that allow access to multiple computers from a single console (keyboard, mouse, and monitor). Before the development of the Master View, the only way to control multiple computer configurations from a single console was through a complex and costly network system. Now, with the ACS-1216A, you can easily access multiple computers in a cost effective manner.
A single Master View can control up to 16 (ACS-1216A) computers. As many as 31 additional switches can be added in a daisy chain configuration, allowing up to 512 computers to be controlled from a single keyboard-monitor-mouse console.
Technical Information
Number of Computers: 16
Number of Users: 1
Video Signals: SVGAMultiSyncVGA
Graphics Resolution: 2048 x 1536 Maximum
Scan Intervals: - User Specified: 1 - 255 seconds
System Bootup: - PS/2 keyboard and mouse emulation - computers boot even when the console focus is elsewhere
Security Features: - Administrator/User Password Security Protection (PSP)
Operating Range: 5.9ft
Cable Length: 2 x 5.9ft Cable Included
Interfaces/Ports
User/Console Ports: 1 x 6-pin mini-DIN (PS/2) Female Mouse1 x 6-pin mini-DIN (PS/2) Female Keyboard1 x 15-pin HD-15 Female VGA
Computer Ports: 16 x 15-pin SPDB-15 Female
Other Ports: 1 x 4-pin RJ-11 Female Flash-upgrade1 x 25-pin DB-25 Female Daisy-chain1 x 25-pin DB-25 Male Daisy-chain
Power Description
Input Voltage: 9 V DC
Power Consumption: 8 W Maximum
Environmental Conditions
Temperature: -4 °F (-20 °C) to 140 °F (60 °C) Storage32 °F (0 °C) to 122 °F (50 °C) Operating
Humidity: 0 to 80% Relative Humidity
Physical Characteristics
Form Factor: 1U 19" Rack-mountable
Dimensions: 1.77" Height x 19.01" Width x 6.1" Depth
Shipping Dimensions: 9" Height x 5" Width x 21.5" Depth
Weight: 6.23 lb
Shipping Weight: 9.4 lb
Miscellaneous
Package Contents: - 1 x ACS-1216A KVM Switch
- 2 x Custom KVM Cable Sets (2L-5202P)
- 1 x Firmware Upgrade Cable
- 1 x Power Adapter
- 1 x Rack Mounting Kit
- 1 x User Manual
Additional Information: - Daisy Chain Up to 31 Additional Units to Control Up to 512 Computers
- Auto-Sensing of Station Position on Daisy Chained Installation
- Intelligent OSD (On Screen Display) and Hotkey Switching for Efficient System Handling
- OSD Is Mouse Driven for Quick and Convenient Navigation of The Menus
- DDC Emulation - VGA Settings of Every Connected Computer Are Automatically Adjusted for Optimal Output
- Hot Pluggable Allowing Add or Remove Computers without Powering Down The Switches
- Firmware upgradable to all stations simultaneously via chain
- PS/2 Keyboard and Mouse Emulation - Computers Boot Even When the Console Focus is Elsewhere
- Superior Video Quality - Supports Resolutions of Up To 2048 x 1536
System Requirements:
Console - A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation
- A PS/2 style mouse
- A PS/2 style keyboard
- The following equipment must be installed on each computer
- A VGA, SVGA or Multisync card.
- A 6-pin mini-DIN (PS/2 style) mouse port.
- Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port with +5V DC on pin 5 and ground on pin 4
Compatibility: - Supports PS/2 Compatible Mice, Microsoft Intellimouse Explorer, Logitech FirstMouse+
Certifications & Standards: Platform Support: MacPC
Warranty
Standard Warranty: 1 Year Limited