Description
Product Model: WG302
NETGEAR's ProSafe 802.11g Wireless Access Point sets the standard for next-generation high performance, secure, manageable, reliable wireless local area networks (WLANs). This powerful device provides the ultimate in continuous industry-standard 54 Mbps access to corporate network resources, e-mail, and the Internet for a wireless workforce. Fully compatible with IEEE 802.11g (2.4 GHz), it also can be set for dynamic 108 Mbps 802.11g. In addition, it is backward compatible to preserve your 802.11b-based investments, providing a migration path to higher performance networking. Wireless Distribution System (WDS) supplies wireless point-to-point bridging, point-to-multipoint bridging, and repeater functionality for deployment over large areas. Advanced security features include up to 152-bit Wireless Encryption Protocol (WEP) data encryption, Wi-Fi Protected Access (WPA), 802.1x and Virtual Private Network (VPN) pass-through support, and Medium Access Control (MAC) address filtering. NETGEAR ProSafe Wireless Access Point is rated for plenum air spaces.
Technical Information
Wi-Fi Standard: IEEE 802.11b/g
ISM Band: Yes
ISM Maximum Frequency: 2.4 GHz
Number of Antennas: 2
Antenna Gain: 5 dBi
Antenna Connector: RP-SMA Connector
Wireless Transmission Speed: 108 Mbps
Transmission Speed Details: 11Mbps Auto-fallback IEEE 802.11b1Mbps IEEE 802.11b6Mbps IEEE 802.11g54Mbps Auto-fallback IEEE 802.11g108Mbps 2x Mode
Transmit Power: 19.8 dBm Maximum
Receiver Sensitivity: 96 dB Maximum @
Modulation: DSSS
Interfaces/Ports
Number of Ports: 1
Fast Ethernet Port: Yes
Interfaces/Ports: 1 x DB-9 Console Management1 x RJ-45 10/100Base-TX LAN
Media & Performance
Connectivity Media: Twisted Pair
Data Transfer Rate: 10Mbps Ethernet100Mbps Fast Ethernet
Network & Communication
Stackable: Not Applicable
Management & Protocols
Management: - Remote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI)
- SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB
Security Features: - Secure SSH Telnet
- MAC address filtering with access control lists-up to 256 users
- Secure Socket Layer (SSL) remote management login
- VPN pass-through support
Processor & Chipset
Processor: Intel IXP422
Memory
Memory: 16MB DRAM8MB Flash Memory
Controls/Indicators
Status Indicators: - Power
- Test
- 100 Mbps
- Link/ACT
- WLAN 802.11g
Power Description
Input Voltage: 12 V DC
Input Current: 1.2 A
Power Consumption: 14.4W
Power Source: AC Adapter
Environmental Conditions
Temperature: 0 °C (32 °F) to 40 °C (104 °F) Operating
Humidity: 90% Maximum Non-condensing Relative Humidity Operating
Physical Characteristics
Form Factor: Wall-mountable
Dimensions: 1.25 " Height x 7.4 " Width x 4.8 " Depth
Shipping Dimensions: 4.3" Height x 10" Width x 12.1" Depth
Weight: 1.27 lb
Shipping Weight: 5.19 lb
Miscellaneous
Package Contents: - ProSafe 802.11g Wireless Access Point WG302
- Two (2) 5 dBi Detachable Antennas
- Resource CD
- Power adapter
- 3 m (10-ft) Ethernet cable
- Wall Mounting Kit
- Installation guide
- Warranty/support information card
Additional Information: Advanced wireless features:
- Wireless Distribution System
- Point-to-point wireless bridge mode
- Point-to-multipoint wireless bridge mode
- Repeater mode
- Simultaneous wireless bridge and access point mode
- Adjustable output power control 100 mW down to 0 mW
System Requirements: - Windows 98, Me, 2000, or XP
- 2 Mbytes of available disk space
Certifications & Standards: - IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11e
- IEEE 802.3af Power over Ethernet (PoE)
- FCC Part 15 Subpart B and Subpart C
- CE EN60950
- EN 300328-2 v1.1.1 (2000-07)
- EMC EN301489-1 v1.2.1 (2000-08)
- EN301489-17 v1.1.1 (2000-09)
- EN55022(B)
- CISPR22(B)
- AS/NZS 3548(B)
Warranty
Standard Warranty: Lifetime
Customer Reviews
