Description
2200VA line interactive UPS for server, network and telecommunications equipment / 2U rackmount form factor / Corrects brownouts and overvoltages from 79 to 147 / Sine wave output / Uninterruptible Power Supply (UPS) maintains battery derived AC output during blackouts and severe voltage fluctuations / Expandable runtime with optional external battery packs / 8 output receptacles / NEMA 5-20P input plug, NEMA 5-15P replacement plug included / Network-grade AC surge and noise suppression / Network management interfaces include 2 USB ports, 2 DB9 serial ports and SNMPWEBCARD slot / Supports simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions via all 5 network interfaces at once / Includes PowerAlert monitoring software and complete cabling / Emergency Power Off (EPO) interface / Integrated 3 bank switched PDU / 3 stage metered current monitoring and battery charge LEDs / Mains power and voltage regulation LEDs / Audible alarm / Self-test / 4 post rack mounting accessories / 2-9USTAND and 2POSTRMKIT accessories available / Field replaceable, hot swappable internal batteries and battery packs / Attractive all-black UPS design / Two year warranty with $250,000 connected equipment insurance / Extended warranty and service contracts available
Technical Information
Plug/Connector Type: NEMA 5-20P
Receptacles: 4 x NEMA 5-15R4 x NEMA 5-20R
Switching Time: 4 ms
Power Description
Load Capacity: 2200VA/1600W
Input Voltage: 110V AC
Input Voltage Range: 120V AC Single-phase
Output Voltage: 120V AC Single-phase
Frequency: 60Hz
Waveform Type: Sine Wave
Filtering: EMI/RFI
Management
Network Management: SNMP Manageable Optional
Overload Protection: Resettable circuit breaker
Alarm: On BatteryLow BatteryOverload
Emergency Power OFF: Yes
Controls/Indicators
Status Indicators: 5 front panel LEDs - Green POWER LED, Green VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
Interfaces/Ports
Interfaces/Ports: 2 x USB2 x DB-9
Modular Slots: 1 x Communications Slot
Battery Information
Batteries: Sealed Lead-acid User-replaceable Hot-swappable
Backup/Run Time: 8 Minute 2200VA Full-load20 Minute 1100VA Half-load
Battery Life: 3 Year to 6 Year
Battery Recharge Time: 4 Hour
Environmental Conditions
Temperature: 32 °F (0 °C) to 104 °F (40 °C) Operating
Humidity: 0 to 95% Non-condensing Relative Humidity
Physical Characteristics
Form Factor: 2U Rack-mountable
Power Cord/Cable: 10 ft
Shipping Dimensions: 9" Height x 23.5" Width x 20" Depth
Shipping Weight: 72 lb
Miscellaneous
Package Contents: - SMART2200RMXL2U UPS System
- PowerAlert Software and cabling
- Mounting hardware for 4 post rackmount installation
- Warranty information
- Instruction manual
Additional Information: - 2200VA / 1600 watt output power capacity compatible with North American 120V / 60Hz power
- 2U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 19 inches
- Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
- Line interactive Automatic Voltage Regulation (AVR) corrects inputs from 79-147VAC back to usable 120V levels without consuming battery power
- Dual boost AVR circuits boost undervoltages by 14% or 24% depending on the severity and reduces overvoltages by 12%
- Network interfaces support simultaneous communications via 2 USB, 2 DB9 serial and SNMPWEBCARD slot
- Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
- Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff, activate self-test and load bank output power control
- Built in Emergency Power Off (EPO) interface with cable
- Sine wave output in AC and battery modes
- Expandable runtime with optional battery packs - BP48V24-2U (limit 1) and BP48V60RT-3U (multi-pack compatible)
- Half load runtime of 20 minutes with internal batteries, Add 1 BP48V24-2U for 68 minutes or 1 BP48V60RT-3U for 147 minutes (1100VA / 800 watts)
- Full load runtime of 8 minutes with standard internal batteries, Add 1 BP48V24-2U for 30 minutes or 1 BP48V60RT-3U for 66 minutes (2200VA / 1600 watts)
- Includes 8 output receptacles arranged in 3 load banks (4 NEMA 5-15R / 4 NEMA 5-15/20R)
- Ships with NEMA 5-20P input plug, user installable NEMA 5-15P replacement plug included to enable connection to common 15A receptacles
- Integrated 3 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices
- 3 stage metered LEDs offer current monitoring and battery charge level
- Mains power and voltage regulation LEDs offer at-a-glance power status information
- Front panel switches support self-test and alarm cancel functions
- Included UPSRMRII adjustable mounting rails support installation in 19 inch racks with a front-to-rear depth of 23.5 and 36.5 inches (add a 2nd UPSRMRII accessory to extend the reach to 35.25 to 49.5 inches)
- UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
- Supports 2 post rackmount installation with optional 2POSTRMKIT accessory
- Supports upright tower placement with optional 2-9USTAND accessory
- UL (USA), cUL (Canada), NOM (Mexico), FCC Class A (Emissions) listed
- 2 year manufacturers product warranty, $250,000 Ultimate Lifetime Insurance
System Requirements: TYPICAL APPLICATIONS: Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
Warranty
Standard Warranty: 2 Year
Customer Reviews
